Learning how to wash hair extensions properly is the single habit that decides whether your hair still looks glossy in month five or starts to feel dry, matted and tired by week six. The good news is that the routine is not complicated. It is slower and more deliberate than washing your own hair, and it changes a little depending on whether you wear tape-ins, keratin tips, nanotips, wefts or clip-ins, but once you have done it three or four times it becomes second nature.
This guide walks you through the full routine we teach our own clients, step by step. You will learn how often to wash, which products to use and which to keep away from your bonds, how water temperature and hard water affect extension hair, and how to dry and detangle without stressing your natural hair. Whether you live in Vancouver, Toronto, Calgary, Dallas, Phoenix or New York, the same principles apply. Only the water coming out of your tap changes.
One thing to keep in mind before you start: extension hair does not get any natural oil from your scalp. Your own hair is fed a little sebum every day, but the lengths of an extension rely completely on what you put on them. That is why washing is really two jobs at once. You are cleaning the scalp and the attachment points, and you are protecting hair that cannot repair or replenish itself.
In this guide
- Why washing extensions is different from washing your own hair
- How often should you wash hair extensions?
- Products and tools for wash day
- Water temperature and hard water in Canada and the US
- How to wash hair extensions: the full step-by-step routine
- How to wash hair extensions by method
- Drying and detangling after the wash
- Troubleshooting common wash-day problems
- Frequently asked questions
- Your next step
Why washing extensions is different from washing your own hair
When you wash your natural hair, you can be a little careless and get away with it. Your scalp keeps producing oil, new hair keeps growing, and small amounts of damage are gradually replaced. Extension hair has none of that backup. Every strand on your head that came in a pack is a finite resource, so the way you wash it matters more.
No natural oil reaches the lengths
Sebum travels down your own hair shaft from the root. It cannot jump across a tape, a keratin bond or a bead and travel into the extension. This means extension hair is always a little drier than your own hair, and over-cleansing it with strong shampoo makes that dryness worse very quickly. The American Academy of Dermatology recommends concentrating shampoo on the scalp rather than the full length of the hair, and that advice is even more important when the lengths are extensions.
The attachment points are the weak link
Tape adhesive, keratin bonds, silicone-lined nano rings and sewn or beaded wefts are all designed to hold firmly under normal conditions. They are not designed to be scrubbed hard, soaked in conditioner or exposed to oils. Most slipping and shedding that clients blame on the hair is actually caused by product sitting on a bond or tape, or by friction at the root during washing.
Cuticle direction decides how the hair behaves wet
Premium extension hair, including the Slavic and Remy hair we sell, keeps its cuticles aligned in one direction from root to tip. That alignment is what lets the hair feel smooth and resist tangling. If you wash by piling the hair on top of your head and rubbing it, you push those cuticles against each other and invite knots. If you want the detail on cuticle quality and grading, our piece on what hair grades like 10A and 12A really mean explains it well.
Wet hair is more fragile
Hair stretches and weakens when it is wet, which is common professional knowledge in every salon. Wet extension hair is also heavier, which adds pull to every attachment point. That is why the routine below keeps the hair in a downward position, avoids wringing, and gets the hair from soaking to damp as gently and as quickly as possible.
How often should you wash hair extensions?
For most people wearing semi-permanent extensions, washing two or three times a week is the sweet spot. That is often enough to keep the scalp clean and the attachments free of build-up, and infrequent enough that the lengths are not being stripped constantly. Your own scalp type, activity level and climate will move that number up or down.
Factors that change your washing frequency
- Scalp type. An oily scalp may need washing every second day, while a dry scalp may be happy with twice a week. The AAD notes that people with an oily scalp may need to wash more often, and people with dry or curly hair less often.
- Exercise. Sweat sits at the root, right where your attachments are. If you train most days, you may need a scalp-focused rinse between full washes. Our guide to working out and swimming with extensions covers that in detail.
- Climate. Humid summers in Houston or Toronto mean more sweat and more frizz. Dry winters in Calgary or Denver mean more static and drier ends. Adjust as the seasons change.
- Styling products. If you use dry shampoo, texture spray or hairspray daily, residue builds up faster and you will need to wash a little more often.
- Method. Clip-ins are washed separately and far less often, because they do not sit against your scalp all day. More on that below.
Why washing too often is a problem
Each wash removes some of the moisture you have put back into the hair, and each wet-to-dry cycle puts a little stress on the attachments. Daily washing usually leads to drier ends, more frequent tangling and shorter wear between maintenance appointments. If you feel you need daily washing, look first at whether a heavy product or an oily scalp is the real issue.
Why washing too rarely is also a problem
Going a week or more without washing allows oil, sweat, dead skin and product to collect around tapes, bonds and rows. That build-up can loosen adhesives, encourage matting at the root and make the scalp itchy. If your scalp is persistently itchy, flaky or sore, see a dermatologist or doctor rather than trying to wash it away, and read our post on scalp care for hair extension wearers.
Products and tools for wash day
You do not need a shelf full of products to look after extensions. You need a few good ones, used in the right places. The most common mistake we see is not the wrong shampoo; it is the right conditioner applied to the wrong part of the head.
Shampoo
Choose a gentle, sulphate-free shampoo designed for colour-treated or extension hair. Strong clarifying formulas have their place (we cover that in the troubleshooting section), but as an everyday choice they strip too much from hair that cannot replace its own oils. If you are curious about how shampoos and conditioners actually work, a dermatology review titled Hair cosmetics: an overview explains the different formulations in plain clinical language.
Conditioner and mask
A rich conditioner and a weekly hydrating mask are what keep extension hair soft. Both go on the mid-lengths and ends only. Never apply them to the scalp area where your tapes, bonds or rows sit, because the oils and silicones that make hair feel silky also soften adhesives and make beads slip.
Leave-in and heat protectant
A lightweight leave-in spray helps you detangle and protects the ends while drying. If you will be blow-drying or heat styling, follow with a heat protectant on the lengths. Our upcoming post on heat styling hair extensions safely goes deeper on temperatures and technique.
Tools
- A soft-bristle extension brush or loop brush that glides over bonds without catching.
- A wide-tooth comb for detangling conditioner through the lengths.
- A microfibre towel or soft cotton T-shirt for blotting.
- A hairdryer with a cool setting and a nozzle.
- Soft scrunchies or a silk scrunchie for a loose braid afterward.
How to read a shampoo label
Marketing words on the front of a bottle tell you very little. Turn it over and look at the first few ingredients, since they make up most of the formula. If oils or butters appear near the top of a conditioner, that product belongs on your ends only. If a shampoo lists strong cleansing agents high up and is labelled for oily or clarifying use, keep it for occasional build-up days rather than every wash.
It also helps to choose one shampoo and one conditioner and stick with them for a few weeks. When you change five products at once, you cannot tell which one made the hair feel better or worse. Introduce new products one at a time, and if anything causes scalp irritation, stop using it.
Why the same products may not suit your own hair
Your natural hair and your extensions sometimes want slightly different things. Your scalp may be oily while the extension lengths are dry, or your own hair may be fine and easily weighed down while the extensions handle richer conditioning. That is exactly why the routine separates the scalp from the lengths: a light, cleansing focus at the root and a nourishing focus on the ends.
Ingredients to keep away from attachments
| Ingredient or product | Why it causes problems | Where it is safe |
|---|---|---|
| Oils (argan, coconut, jojoba) | Soften tape adhesive and keratin bonds, make rings slip | Ends only, sparingly, away from the top 5 cm of the extension |
| Heavy silicones and conditioners | Leave a slippery film on tapes and bonds | Mid-lengths and ends |
| Alcohol-heavy sprays | Can weaken some adhesives and dry the hair | Use sparingly and away from the root |
| Strong clarifying shampoo | Strips moisture from the lengths when used often | Occasional use for build-up, followed by a mask |
| Thick dry shampoo powders | Collect around bonds and rows, cause matting | Light use at the root, brushed through, washed out within a day or two |
Always check your stylist's specific aftercare instructions as well, because adhesives and bonding products vary. If you bought your hair from us and had it installed locally, ask your stylist which products they are comfortable with on their particular tape or bond.
Water temperature and hard water in Canada and the US
Water is the product you use most on wash day, and it is the one people think about least. Two things matter: how hot it is and what minerals are in it.
Use lukewarm, not hot
Very hot water can soften tape adhesive and keratin bonds, and it tends to leave hair feeling drier and frizzier once it dries. Lukewarm water is enough to dissolve oil and product on the scalp. Finish with a cool rinse over the lengths if you like the extra smoothness, but keep it comfortable rather than icy.
What hard water is
Hard water is water with a high level of dissolved minerals, mainly calcium and magnesium. The U.S. Geological Survey explains that hardness comes from calcium and magnesium picked up as water moves through soil and rock, and that hard water reacts with soap to form the familiar scum. It classifies water above 120 milligrams per litre as hard and above 180 as very hard.
Hardness varies a great deal across Canada and the United States depending on the local geology and water source. Many households on the Prairies, in parts of Ontario and in much of the American Southwest and Midwest deal with harder water, while areas served by mountain or rain-fed reservoirs tend to be softer. Your municipality usually publishes its water hardness in its annual water quality report, so check that rather than guessing.
How to find out whether your water is hard
You do not need a lab to get a good idea. Signs of hard water at home include white scale on taps and shower heads, spots on glassware, soap that lathers poorly and a film left on skin after showering. For a real number, look up your city or water utility's water quality report, which usually lists hardness in milligrams per litre. If you are on a private well, inexpensive test strips from a hardware store will give you a rough reading.
What hard water does to hair
Research on this is limited, but it points in a consistent direction. One small study published in the International Journal of Dermatology found that hair washed in hard water showed more mineral deposits and a ruffled surface under an electron microscope compared with hair washed in distilled water. Another study found more magnesium deposits on hair washed in hard water but no significant structural surface damage. So mineral build-up is likely; dramatic damage from hard water alone is less certain.
In practice, what extension wearers notice is hair that feels coated, dull or straw-like, shampoo that does not lather well, and blonde shades that start to look brassy or slightly green. Because extension hair cannot shed and replace those strands, the build-up accumulates over the life of the hair.
How to manage hard water
- Fit a shower filter. A filter designed to reduce minerals can help. Results vary by product and by how hard your water is, so treat it as an improvement rather than a cure.
- Clarify occasionally. A gentle chelating or clarifying wash every few weeks lifts mineral build-up. Always follow with a deep conditioning mask on the lengths, and keep the clarifier away from tapes and bonds as much as practical.
- Rinse with filtered or distilled water. Some clients keep a jug of filtered water for a final rinse over the lengths. It is a small step that makes a noticeable difference in very hard water areas.
- Protect blondes. If your blonde extensions start to warm up, a professional gloss or toner can refresh them. Our post on whether you can dye human hair extensions explains what is safe.
Chlorine and salt water
Pool chlorine and ocean salt both dry hair out, and that matters more for extensions. Wet your hair with clean water before swimming, tie it in a braid, and rinse and condition as soon as you are out. It is not a reason to avoid the pool, just a reason to plan your wash day around it.
How to wash hair extensions: the full step-by-step routine
This is the routine we recommend for semi-permanent extensions such as tape-ins, keratin tips, nanotips and sewn or beaded wefts. Clip-ins have their own process in the next section. Give yourself 30 to 45 minutes the first few times, including drying. It gets faster.
- Brush thoroughly before you get wet. Start at the ends and work up in sections, holding the hair just below the attachments with your other hand so you do not pull on the bonds. Never wash hair that is already tangled; water tightens knots.
- Section if your hair is long or thick. Loosely divide it into two or three sections with soft clips. This helps the water and shampoo reach the scalp evenly.
- Wet the hair in a downward direction. Stand upright in the shower and let the water run from the crown down the lengths. Avoid flipping your head upside down over a sink or bath, which tangles the lengths and puts pressure on the attachments.
- Dilute your shampoo. Mix a small amount with water in your palm or a bottle. Diluted shampoo spreads more easily over the scalp, which means less rubbing.
- Cleanse the scalp, not the lengths. Work the shampoo between the rows of attachments using the pads of your fingers, moving in small, gentle strokes. Clean around tapes and bonds carefully without scratching or scrubbing across them.
- Let the suds run down. As you rinse, the lather will run through the lengths and clean them adequately. You do not need to scrub the extension hair itself.
- Rinse very well. Leftover shampoo at the root is a common cause of itching and residue. Rinse longer than you think you need to, lifting sections gently so water reaches the scalp around each attachment.
- Repeat only if needed. If you used heavy dry shampoo or styling products, a second, lighter shampoo can help. Otherwise, one wash is enough.
- Squeeze out excess water. Gently press the lengths with your hands. This stops the conditioner from being diluted.
- Apply conditioner to mid-lengths and ends. Start about a hand's width below the attachments and work down. Keep it well away from tapes, bonds and rows.
- Detangle with a wide-tooth comb. While the conditioner is in, comb from the ends upward, holding the hair above the section you are combing.
- Leave it for a few minutes. Two to five minutes for a regular conditioner, or the time on the label for a mask. Once a week, swap in a mask.
- Rinse with lukewarm or cool water. Rinse thoroughly so no conditioner remains near the root area.
- Blot, never rub. Wrap the lengths in a microfibre towel or soft T-shirt and press. Do not twist the hair up into a tight towel turban, which pulls on the attachments.
- Apply leave-in and heat protectant to the lengths. Mist lightly and comb through.
- Dry the roots straight away. Use the method in the drying section below. Never leave the attachment area wet.
A note on wash-day timing
Wash in the morning or early evening when you have time to dry the roots completely. Going to bed with damp attachments is one of the fastest ways to create matting. If you are tired at night, it is better to wait and wash the next day. Our post on how to sleep with hair extensions covers the night-time side of things.
The first wash after installation
Most stylists ask you to wait at least 48 hours after a tape-in or bonded install before your first wash, so adhesives and bonds can settle. Follow the exact timing your stylist gives you, because it varies with the product they use. Until then, keep the root area dry and avoid sweaty workouts and steam rooms.
How to wash hair extensions by method
The core routine stays the same for every method: brush first, wash downward, shampoo the scalp, condition the ends, dry the roots. What changes is where you need to be extra careful.
| Method | Main wash-day risk | Key adjustment | Typical wash frequency |
|---|---|---|---|
| Tape-ins | Adhesive softening from oil, conditioner and heat | Lukewarm water, no product on tapes, dry tapes fully | 2 to 3 times a week |
| Keratin tips | Bonds softening or matting at the root | Separate bonds with fingers while drying | 2 to 3 times a week |
| Nanotips | Rings slipping when coated with product | No conditioner near rings, dry rings fully | 2 to 3 times a week |
| Sewn or beaded wefts | Moisture trapped under the row | Cleanse along the row with a nozzle bottle, dry under the weft | 2 to 3 times a week |
| Clip-ins | Over-washing, rusty or loose clips | Wash off the head, dry flat with clips open | Every 15 to 20 wears, or when they feel heavy |
Tape-in extensions
Tape-ins sit flat against the scalp, which makes them comfortable but also means product and water can sit directly on the adhesive. Use diluted shampoo between the tape rows, avoid scrubbing over the tapes themselves, and keep every drop of conditioner and oil below them. Dry the tape area first, using the cool or warm setting and lifting the hair so air flows between the rows.
If you wear our straight tape-in extensions or the natural wave invisible tape-ins, this routine is exactly what will help you get the most wear between move-ups. For the full picture of application, lifespan and removal, see our tape-in hair extensions guide.
Keratin tip extensions
Keratin bonds are small and individual, which is wonderful for natural movement but means the hair right above the bonds can mat if it is left damp or rubbed. After shampooing, run your fingers gently between the bonds to make sure they are separated, and do this again during drying. Our article on K-tip hair extensions explained has more on how bonds behave.
Keep hot water and heavy product away from the bonds. Like tapes, they are designed to hold under normal conditions, not under repeated exposure to oils and high heat.
Nanotip extensions
Nanotips are attached with a tiny ring clamped over a strand of your own hair. Water itself is not a problem, but slippery products are. Conditioner or oil on the ring can let it slide down the hair over time. Shampoo around the rings carefully, keep conditioner well below them, and make sure the rings and the hair inside them are fully dry after every wash. Our upcoming nano ring hair extensions guide explains placement and move-ups.
Sewn and beaded wefts
Wefts are attached in rows, and the main wash-day challenge is cleaning the scalp along and under that row without leaving moisture trapped. An applicator bottle with a nozzle is very helpful here: fill it with diluted shampoo and run it along the row, then massage gently with your fingertips. Rinse thoroughly and dry beneath each row, lifting the weft slightly as you go.
This applies to machine wefts, genius wefts and butterfly wefts alike. If you are choosing a weft for the first time, browse our weft hair extensions collection and read the guide to machine, genius, butterfly and hand-tied wefts.
Clip-in extensions
Clip-ins are removed every night, so they do not collect scalp oil in the same way. Wash them only when they look dull, feel heavy with product or no longer move freely, which for most people is every 15 to 20 wears. To wash them:
- Brush each piece thoroughly, holding it by the weft.
- Fill a basin with lukewarm water and a small amount of gentle shampoo.
- Hold each piece by the weft and swish it gently through the water. Do not rub.
- Rinse under running water from the weft downward.
- Apply conditioner to the lengths, leave a few minutes, then rinse.
- Blot with a towel and lay each piece flat, clips open, to air dry.
- Brush once completely dry and store flat or hanging.
For curly clip-ins such as our curly clip-in extensions, skip brushing when dry. Finger-detangle with conditioner in the hair instead, and let the curl form as it dries.
Curly and wavy extensions
Curly hair, whether it is your own or an extension, loses definition and gains frizz when it is brushed dry or rubbed with a towel. Detangle only while conditioner is in, use your fingers or a wide-tooth comb, and scrunch with a microfibre towel or T-shirt. A light curl cream on the lengths helps the curl set as it dries. Our curly hair extensions guide covers matching and styling in depth.
Drying and detangling after the wash
If you only remember one thing from this article, make it this: dry your roots and attachments completely every time. Damp attachments are behind more matting, slipping and odour problems than any shampoo choice.
Root first, lengths second
Start drying at the scalp with the dryer on a warm or cool setting. Lift sections and aim the airflow across the attachment area rather than blasting directly onto tapes or bonds at close range. Once the roots and attachments are dry to the touch, move down to the mid-lengths and ends.
Keep the heat moderate
You do not need maximum heat to dry extensions, and a high heat setting held too close can soften adhesives and dry out the lengths. A medium setting with a nozzle, kept moving, does the job. Finish with a cool shot to smooth the cuticle.
Can you air dry?
You can let the lengths air dry, especially if you want to protect them from heat. The roots, however, should be dried with a dryer. Air drying the attachment area can take hours, particularly with thick hair or in humid weather, and that is long enough for moisture to start causing problems.
Detangling while damp
Use a soft extension brush or wide-tooth comb on the lengths once they are mostly dry. Always start at the ends and work upward, holding the hair above your working section. If you hit a knot, stop, add a little leave-in, and loosen it with your fingers. Pulling through a knot is how strands snap and attachments get stressed.
Finish with a loose braid if you are not styling
Once dry, a loose braid or low ponytail with a soft scrunchie keeps the lengths from rubbing and tangling for the rest of the day or overnight. It is one of the simplest habits that extends the life of extension hair.
Troubleshooting common wash-day problems
Even with a good routine, things occasionally go wrong. Here are the problems we hear about most often, what usually causes them, and what to do.
The hair feels dry or straw-like after washing
The usual causes are shampooing the lengths too often, a strong or clarifying shampoo used every wash, hot water, or hard water minerals. Switch to a gentler shampoo, focus it on the scalp, add a weekly mask, and consider a shower filter. If the hair has been over-lightened or heat damaged, washing alone will not fix it, and our post on signs it is time to replace your hair extensions will help you decide.
Matting at the root
Matting near the attachments usually means the area was left damp, conditioner reached the root, or the hair was not brushed enough between washes. Gently separate the matted area with your fingers and a little leave-in, never with force. If a mat is large or tight, book a maintenance appointment rather than cutting or pulling at it. Our article on why hair extensions tangle and how to fix it goes into detail.
Tapes slipping or bonds loosening
Look at what is touching your attachments. Oils, leave-ins and conditioners applied too high are the most common causes, followed by very hot water and heat styling too close to the root. Stop the product, keep the area clean and dry, and see your stylist about re-securing the pieces.
Residue, dullness or a coated feel
This is often build-up from dry shampoo, styling products or hard water. A gentle clarifying wash on the scalp, followed by a mask on the lengths, usually clears it. Make sure you are rinsing long enough, especially around the attachments.
Brassy or greenish tones in blonde extensions
Minerals in hard water and chlorine from pools can both shift blonde tones. A filter and clarifying routine help prevent it. For tone correction, a professional gloss or toner is the safest route, and a purple shampoo used occasionally can help keep yellow undertones in check.
The scalp itches after washing
Itching is often caused by shampoo or conditioner left at the root, or by washing too rarely. Rinse longer and make sure conditioner stays on the lengths. If you notice redness, flaking, swelling, burning or ongoing irritation, stop using new products and see a dermatologist or doctor. Product reactions such as contact dermatitis need proper diagnosis, and so do scalp conditions that can look similar.
The hair smells musty
A musty smell almost always comes from moisture trapped at the root or under a weft. Dry the attachment area fully every time, and do not sleep on damp hair. If the smell persists, see your stylist so they can check whether moisture has been trapped inside a bond or under a row.
Common mistakes at a glance
- Washing with your head upside down.
- Rubbing shampoo into the lengths.
- Applying conditioner or oil to tapes, bonds or rings.
- Using very hot water.
- Wrapping wet hair in a tight towel turban.
- Going to bed with damp roots.
- Brushing from the root down through tangles.
For a broader list, read our article on the most common hair extension aftercare mistakes.
When to book professional help
Washing at home keeps extensions clean and comfortable, but it does not replace regular maintenance. If you notice slipping attachments, matting you cannot loosen gently, discomfort or tension at the root, or hair that feels permanently dry, your stylist should take a look. At our Delta salon in British Columbia we also offer treatments such as a Gloss Treatment and The Root Refresh head spa, described on our hair treatments page, but any trained extension stylist near you can assess the hair.
Building a weekly wash schedule
Here is a simple example schedule for someone wearing tape-ins or keratin tips who works out a few times a week. Adjust it to your own scalp and lifestyle.
- Monday: Full wash, conditioner, weekly mask, blow-dry roots, loose braid.
- Tuesday and Wednesday: Brush twice daily, light leave-in on ends if needed.
- Thursday: Full wash, regular conditioner, dry and style.
- Friday and Saturday: Brush twice daily, minimal dry shampoo at the root if needed.
- Sunday: Full wash, regular conditioner, dry and braid for the week ahead.
- Every three to four weeks: A gentle clarifying wash, followed by a mask.
Wash day while travelling
Hotel water, unfamiliar shampoos and limited drying tools can all throw your routine off. Pack small bottles of your own shampoo, conditioner and leave-in, and bring a travel brush designed for extensions. If the hotel dryer is weak, give yourself extra time to dry the attachments fully before going out, and avoid washing late at night.
Frequently asked questions
Can I wash my hair extensions every day?
You can, but it is rarely necessary and it usually shortens the life of the hair. Most people do best with two or three washes a week. If your scalp gets oily quickly, try a lighter, scalp-focused wash on in-between days rather than a full shampoo and condition.
What shampoo is best for human hair extensions?
A gentle, sulphate-free shampoo designed for colour-treated or extension hair is the safest everyday choice. Avoid formulas that are heavy in oils or marketed as intensely clarifying for daily use. Keep a gentle clarifier for occasional use if you have hard water or product build-up.
Can I use dry shampoo with extensions?
Yes, in moderation. Spray lightly at the root, let it sit, then brush it through well so powder does not collect around the attachments. Wash it out within a day or two. Heavy daily use leads to residue and matting.
Does hard water damage hair extensions?
Hard water deposits minerals on hair, and studies show more calcium and magnesium on hair washed in hard water. Extension wearers often notice dullness, a coated feel and brassiness in blonde shades. A shower filter, occasional clarifying wash and regular masks help manage it in hard water areas across Canada and the US.
How long after installation can I wash my extensions?
Most stylists recommend waiting at least 48 hours after a tape-in or bonded install so the adhesive or bonds can settle. Follow your stylist's instructions exactly, since the timing depends on the products they use.
Should I wash my extensions before installation?
This depends on the method and your stylist's preference, so ask them before your appointment. Many stylists ask you to arrive with freshly washed, fully dry natural hair and no conditioner or styling product near the roots, so attachments grip clean hair.
Do you ship hair extensions to both Canada and the USA?
Yes. We ship across Canada and the United States with FedEx tracking, and shipping rates are calculated at checkout. You can read the full details on our shipping policy page.
Can I swim with extensions and then wash them normally?
Yes. Wet your hair with clean water first, braid it, and rinse and condition as soon as possible afterward. Wash as usual the same day, paying extra attention to drying the roots. Chlorine and salt both dry hair, so add a mask that week.
Your next step
Knowing how to wash hair extensions well comes down to a few habits: brush before you wet, wash downward, shampoo the scalp, condition only the lengths, use lukewarm water, and always dry the roots. Do that consistently and your hair will stay soft, glossy and comfortable for much longer between appointments.
If you are ready to choose new hair, you can shop all Beautico hair extensions, including tape-ins, wefts and pre-bonded keratin and nanotip hair, in Slavic and Remy qualities. Prices are listed in CAD, and checkout shows your final price including shipping. If you would like advice on which method suits your lifestyle and wash routine, book a free extension consultation at our Delta salon or send us a message and we will help wherever you are in Canada or the USA.